Your gateway to the health industry
Jian Yuan Medical Technology Co.,Ltd.
Infusion and syringe pumps
medical infusion pump for critical care
Infusion pump
Model: JSB-1200
CHARACTERISTICS
- Compatible with IV sets of any brand with high accuracy.
- Automatically calibration for IV sets of any brand.
- Three working modes: Drop counting control,Rate control and Time control mode.
- 8 Hours internal battery life in high capacity.
- Have a unique color LCD and an internal battery with a high capability.
-
Switch between ml/h and drops/min freely.
-
Three levels of alarm volume: high, medium and low.
-
Three levels of occlusion pressure: high, medium and low.
-
KVO function： When finish the total volume of an infusion, the pump will alarm and enter KVO state.
SPECIFICATIONS
Controls:
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
Accuracy:
Accuracy:
≤25drop/min: ±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1～400drop/min(1drop/min step)
1.0ml/h～1200ml/h (1.0ml/h～99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)
Rapid injection: 600ml/h
KVO Rate: When the delivery rate≤10ml/h, KVO is 1 ml/h. Ot herwise KVO is 3ml/h.
Alarms:
Alarms:
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waiting time Over, No drop been detected, Operational errors, Low battery, other device failures.
Power Supply:
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
| Address |
Floor 9, 199 Lulong Road, Changsha National High-Tech Industrial Development Zone Changsha, Hunan, China 410205 |
| Tel | 0086-731-88801378 |
| Website | en.jympump.com |